Zerust® Z-Maxx is an oil-based, heavy-duty, corrosion preventive and lubricant
grease that is tenacious and hydrophobic. It protects metal parts for one year
outdoors and up to two years under shelter.
Use Zerust® Z-Maxx to protect industrial machinery, military equipment, wheel
bearings, journal bearings, construction and forestry equipment, electric motors
and more during long-term storage or use. Zerust® Z-Maxx leaves a clear film
on the surface of the metal and has very little odor.
Zerust® Z-Maxx is designed to replace and outperform most petroleumbased
corrosion inhibiting products, including the widely known Cosmoline
and similar materials. Zerust® Z-Maxx is easier to apply and remove - saving
considerable labor and maintenance costs. Z-Maxx also provides significant
lubrication properties in wide temperature range applications such as
automotive, industrial and agricultural wheel bearing applications.
APPLICATION EXAMPLES
ZERUST® Z-MAXX BEING APPLIED TO AN ENGINE FOR LONG-TERM CORROSION PROTECTION DURING STORAGE.
CORROSION PROTECTION FOR :
Directions for use:
1.
Make sure parts are clean and dry.
2.
Wear gloves when handling parts to avoid corrosion causing fingerprints.
3.
Make sure the part temperature is equal to the ambient temperature when coating.
4.
Brush room temperature Z-Maxx onto parts or dip parts in warmed Z-Maxx and remove any excess material. (Ease of application can be enhanced by adding mineral spirits to Zerust® Z-Maxx.)
5.
Use or store parts in protected storage for up to 2 years or outdoors for 9-12 months.
Removal:
Zerust® Z-Maxx can be easily removed by using any commercially available solvent and/or alkaline cleaner. Always check with your customer to see if removal of Z-Maxx is required prior to the use of the protected parts.
ICT®700 Series Overview: LIQUID ADDITIVES & COATINGS:
Product Name
Metals Protected
Corrosion
Protection
Life Outdoors
Corrosion
Protection
Life Indoors*
Formulation
Base
Surface Finish
Axxanol™ 33
Iron, steel, aluminum,
zinc and solder
Not recommended
6-8 months*
Oil-based
Thin oil
Axxanol™ 33CD
Iron, steel, and copper
Not recommended
4-6 months*
Solvent-based
Very thin oil, dry to touch
Axxanol™ 34CD
Iron, steel, aluminum,
zinc, copper and solder
Not recommended
6 months*
Solvent-based
Very thin oil
Axxanol™ 46-BIO
Iron, steel, aluminum, zinc and solder
1-3 months
10-12 months*
Bio-based
Thin oil
Axxatec™ 77C (1:24 dilution)
Iron, steel, aluminum,
brass, zinc and copper
Not recommended
3-4 months*
Water-based
Thin oil
Z-Maxx
Iron, steel, aluminum,
brass, zinc and copper
9-12 months
18-24 months*
Oil based
Thick, grease
TYPICAL SPECIFICATIONS - AS HT MULTIPURPOSE GREASE:
Property
ASTM
Standard
Z-Maxx
Color
Tan
Structure
Smooth,
Buttery
Salt fog corrosion
B-117
4000 hr
Corrosion, rust prevention (48 hr, 125°F, <1mm dia
spots)
D-1743
Pass
Corrosion, copper compatibility
D-4048
Pass
NLGI grease grade
2
Dropping Point
D-566
+572°F (+300°C)
Anti-wear, 4-ball steel-on-steel scar
D-2266
0.39 mm
Anti-wear, 4-ball Extreme Pressure
D-2596
Load Wear Index (LWI)
“
30 lb (65 kg)
Weld load point
“
1100 lb (500
kg)
Anti-wear, load carrying capacity (Timken method)
D-2509
65 lb (143 kg)
Water washout 79°C (175°F)
D-1264
2.75 %-Loss
Worked penetration (cone, 25°C (77°F), 1/10 mm)
D-217
60 strokes
“
265-275
10,000 strokes change from 60 strokes (extended)
“
265-275
100,000 strokes change from 60 strokes (extended)
“
265-275
Roll Stability, cone penetration (1/10 mm min-max)
*Indoor under shelter or in packaging. Check with your Zerust® sales representative about details on protection with packaging which extends protection life beyond five years.
ICT®500 Series: Packaging Films
Our most widely used series of products. A variety of films offer short or long- term corrosion protection for parts and equipment during storage or shipment.
ICT®600 Series: Rust Removers
Highly effective rust removers for light to severe rust removal. All ICT®600 series rust removers are non-toxic, non-hazardous & non-corrosive.
Español
