Zerust® ICT®620-RR rust remover is compatible with all Zerust® corrosion inhibiting film & packaging products.
APPLICATION TYPE
ORDERING INFORMATION
PART NUMBER
350-F-00002
AVAILABILITY
8 oz. Bottle
1 Gallon Jug
5 Gallon Pail
55 Gallon Drum
RUST REMOVAL
1 gallon of ICT®620-RR removes:
~1/2 pound of rusted steel, or
20 sq. ft. of moderately rusted steel (or 300 lbs.)
SHELF LIFE & HANDLING
Shelf life of 3 years if stored out of direct sunlight. ICT®620-RR may freeze as it contains a large percentage of water, but will remain fully functional when thawed to ambient temperature.
DISPOSAL
Separate residue from the spent ICT®620-RR solution and properly dispose of according to federal, state and local regulations. Spent ICT®620-RR by itself may be disposed of down the drain and into the sewer. Always consult federal, state and local regulations.
Zerust® ICT®620-RR is a highly effective and safe rust remover that completely recovers rusty parts. With Zerust® ICT®620-RR, parts can be completely restored to rust-free condition, replacing labor-intensive, abrasive cleaning that damages surfaces and fails to remove rust from small gear teeth and other difficult-to-reach areas.
Zerust® ICT®620-RR works by bonding with iron to remove iron from iron oxide. The active ingredient reacts only with iron oxide and therefore, does not harm any other metals and non-metals. Simply soak rusty parts in ICT®620-RR and rinse with de-ionized water. Soak time depends on the degree of rust and varies from a few minutes to a full day.
APPLICATION EXAMPLES
RECOVER RUSTED PARTS, SUCH AS OVERSEAS SHIPMENTS, THAT WERE NOT PROTECTED WITH ZERUST® PACKAGING.
REMOVE “FLASH RUST” THAT FORMS ON WORK IN PROGRESS PARTS BEFORE THE NEXT PRODUCTION STEP, SUCH AS BEFORE PAINTING BUT IMMEDIATELY AFTER ABRASION CLEANING.
CORROSION PROTECTION FOR :
DIRECTIONS FOR USE:
1.
Pour Zerust® ICT®620-RR into a container with the rusted parts (fully cover parts).
2.
Soak the rusted parts in Zerust® ICT®620-RR for ~30 minutes for light rust and overnight for heavy, flaking rust. *DO NOT spray the rusty parts with ICT®620-RR - the product will not work this way.
3.
Rinse the parts with de-ionized water and inspect.
4.
Wipe parts with a dry cloth if needed (some black carbon residue may remain on the metal surface).
5.
Repeat soaking if rust remains, and re-rinse.
6.
Air dry. Check for areas where solution may have pooled, re-rinse and dry.
7.
Package parts in Zerust® products to prevent the recurrence of rust.
Note: When the active ingredients are used up, the Zerust ICT 620 bath will turn black and will not remove rust.
PRODUCT PERFORMANCE COMPARISON:
Strong Acid
Strong Alkali
Media Blast (grit, sand,glass, etc.)
Acidic Conversion (primerpaint)
Effectiveness of Rust Removal
Removes all rust
Removes all rust
Removes only surface rust
Converts surface rust to paintable tannic acid iron complex
Speed
Light rust: 5-30 min Heavy rust: ~2 hours-overnight
Landfill in most cases AFTER removal of paint & media
Landfill in most cases
Equipment Required
Proper ventilation
Proper ventilation
Blasting equipment
Brushes or sprayers
Zerust® ICT®620- RR Rust Remover(chelated system)
Removes all rust even in cracks & crevices
Light rust: 5-10min Heavy rust: ~2hours
Soak parts cold, no agitation
Completely safe
Non-flammable
Can be put into city sewer
None
OTHER AVAILABLE PRODUCTS
ICT®500 Series: Packaging Films Our most widely used series of products. A variety of films offer short or long- term corrosion protection for parts and equipment during storage or shipment.
ICT®800 Series: Diffusers Self-contained, portable products that diffuse Zerust® ICT®chemicals to protect metals within enclosures, such as tool boxes, electrical boxes, etc.
Español
