Protects ferrous and some non- ferrous metals including iron, steel, aluminum, brass and copper within closed systems such as aqueous cooling systems or hydraulic systems.
PROTECTION LIFE
Axxanol™ 8110 will protect a closed system, such as aqueous cooling systems or hydraulic systems for up to 6 months.
DILUTION RATIOS
1 part Axxanol™ 8110 to 10 parts coolant or hydraulic fluid.
SHELF LIFE & HANDLING
Shelf life of 2 years if stored in original container, at 85° F or less and out of direct sunlight.
DISPOSAL
Dispose of in sanitary sewer. Always consult federal, state and local regulations.
Zerust® Axxanol™ 8110 is an easy-to-use corrosion inhibiting additive that contains our proven ICT® corrosion inhibiting technology. Axxanol™ 8110 was designed for use in closed systems, such as aqueous cooling systems or hydraulic systems, and will protect iron, steel, aluminum, copper and brass parts within these systems for up to six months. Axxanol™ 8110 is water-based and easily diluted with coolant or water-based hydraulic fluids.
In addition, Axxanol™ 8110 will provide a few hours of corrosion protection when used as a coating or final rinse for parts that will be enclosed in Zerust® Film. In this respect, Axxanol™ 8110 helps prevent flash rust in-between production processes, but is not recommended as a long-term or stand-alone external corrosion protection coating.
APPLICATION EXAMPLES
ZERUST® AXXANOL™ 8110 PROTECTING THE METAL TANK OF A HUMIDITY CHAMBER FROM CORROSION.
CORROSION PROTECTION FOR :
DIRECTIONS FOR USE:
1.
Make sure metal surfaces and parts within the system are as clean as possible.
2.
Mix Axxanol™8110 with coolant or hydraulic fluid in a ratio of 1 part Axxanol™8110 to 10 parts fluid.
3.
Wear gloves to avoid corrosion caused by fingerprints on metal surfaces and parts.
4.
Add Axxanol™ 8110/fluid mixture to your cooling or hydraulic system.
5.
The system will be protected for up to six months.
If used as a rinse or temporary coating (a few hours) prior to packaging in Zerust® Film, mix Axxanol™ 8110 with de-ionized water in a ratio of 1 part Axxanol™ 8110 to 10 parts water.
REMOVAL:
Flush system with de-ionized water or rinse parts to remove Axxanol™ 8110.
ICT®700 SERIES OVERVIEW: LIQUID ADDITIVES & COATINGS:
Product Name
Metals Protected
Corrosion
Protection
Life
Formulation Base
Surface Finish
AxxanolTM 33
Iron, steel, aluminum,zinc and solder
6 months
Oil-based
Thin, medium oil
AxxanolTM 33CD
Iron, steel, aluminum,zinc and solder
6 months
Solvent-based
Thin, dry to touch
Axxanol™ 34CD
Iron, steel, aluminum,
zinc, copper and solder
Not recommended
Solvent-based
Very thin oil
AxxanolTM 8110
Iron, steel, copper,brass and aluminum
6 months
Water-based
Thin, invisible
AxxatecTM 77C
Iron, steel, aluminum,brass, zinc and copper
4 months
Water-based
Thin, cloudy,visible
Z-Maxx
Iron and steel
2 years
Oil-based
Thick,grease
OTHER AVAILABLE PRODUCTS
ICT®500 Series: Packaging Films
Our most widely used series of products. A variety of films offer short or long- term corrosion protection for parts and equipment during storage or shipment.
ICT®600 Series: Rust Removers
Highly effective rust removers for light to severe rust removal. All ICT®600 series rust removers are non-toxic, non-hazardous & non-corrosive.
Español
