Zerust® Axxanol™ 33CD is an easy-to-use, solvent-based corrosion
preventive coating that dries to the touch, eliminating sticky and oily
surfaces that can pick up dirt and contaminants. Axxanol™ 33CD
provides powerful corrosion protection against aggressive environments
(salt air, high temperatures, etc.) for ferrous and some non-ferrous
metals including iron, steel, aluminum, zinc, copper and solder for up
to six months under shelter.
Use Zerust® Axxanol™ 33CD to protect metal parts and cast & machined
metals during shipment, storage and work-in-progress. Zerust® Axxanol™
33CD is perfect for protecting parts during program changeover periods
in the assembly process. Use in conjunction with Zerust® Ferrous Film for
a more robust solution that protects for up to five years (allow parts to
dry prior to packaging).
APPLICATION EXAMPLES
ZERUST® AXXANOL™ 33CD PROTECTING EXHAUST MANIFOLDS FROM CORROSION DURING OCEAN SHIPMENT FROM CHINA TO THE USA (SHOWN IN A DUAL PROTECTION SYSTEM WITH ZERUST® FERROUS FILM).
WATER PUMP HUBS DIPPED IN ZERUST® AXXANOL™ 33CD FOR CORROSION PROTECTION PRIOR TO OCEAN SHIPMENT FROM CHINA TO GERMANY.
CORROSION PROTECTION FOR :
DIRECTIONS FOR USE:
1.
Make sure parts are clean and dry.
2.
Wear gloves when handling parts to avoid corrosion causing fingerprints.
3.
Apply in a well ventilated area that is away from sources of heat or ignition.
4.
Spray, slush, brush or dip metal parts with Axxanol™ 33CD. Use NIOSH approved mist or air supplied respirator when material is sprayed. In order to maintain “dryto- touch” feel on parts; Axxanol™ 33CD must be maintained at 2% concentration level during use.
5.
Parts must be dry prior to packaging. Drying time is approximately 5 minutes; use a fan to reduce drying time.
6.
Package parts using Zerust® materials for added corrosion protection.
7.
Ship or store parts in protected storage (protects up to six months under shelter).
REMOVAL:
Zerust® Axxanol™ 33CD can be easily removed by using any commercially available alkaline cleaner. Always check with your customer to see if removal of Axxanol™ 33CD is required prior to the use of the protected parts.
ICT®700 SERIES OVERVIEW: LIQUID ADDITIVES & COATINGS:
Product Name
Metals Protected
Corrosion
Protection
Life Outdoors
Corrosion
Protection
Life Indoors*
Formulation
Base
Surface Finish
Axxanol™ 33
Iron, steel, aluminum,
zinc and solder
Not recommended
6-8 months*
Oil-based
Thin oil
Axxanol™ 33CD
Iron, steel, and copper
Not recommended
4-6 months*
Solvent-based
Very thin oil, dry to touch
Axxanol™ 34CD
Iron, steel, aluminum,
zinc, copper and solder
Not recommended
6 months*
Solvent-based
Very thin oil
Axxanol™ 46-BIO
Iron, steel, aluminum, zinc and solder
1-3 months
10-12 months*
Bio-based
Thin oil
Axxatec™ 77C (1:24 dilution)
Iron, steel, aluminum,
brass, zinc and copper
Not recommended
3-4 months*
Water-based
Thin oil
Z-Maxx
Iron and steel
9-12 months
18-24 months*
Oil based
Thick, grease
*Indoor under shelter or in packaging. Check with your Zerust® sales representative about details on protection with packaging which extends protection life beyond five years.
OTHER AVAILABLE PRODUCTS
ICT®500 Series: Packaging Films
Our most widely used series of products. A variety of films offer short or long- term corrosion protection for parts and equipment during storage or shipment.
ICT®600 Series: Rust Removers
Highly effective rust removers for light to severe rust removal. All ICT®600 series rust removers are non-toxic, non-hazardous & non-corrosive.
Español
