Zerust® Axxanol™ 33
    Oil-Based Coating That Replaces Standard Oil
 
 
 
FEATURES  
  • Proven corrosion protection
  • Easy to apply and remove
  • Compatible with most engine lubricants
 
 
BENEFITS  
  • Reduces corrosion incidences
  • Reduce need for rework
  • Saves money & resources
  • Comes with Zerust® global on-site support
 
Replace your current oiling system with Zerust® Axxanol™ 33 and realize a significant difference in the quality of your parts. No more rust!

APPLICATION TYPE

Export System Long-Term-Storage Inventory Storage Work-In-Progress
 
 
ORDERING INFORMATION
 
  • AVAILABILITY/PART NUMBER
    • 5 Gallon Pail: 350-M-00003PL
    55 Gallon Drum: 350-M-00003DR
  • PROTECTION TYPE
    • Protects ferrous and some nonferrous metals including iron, steel, aluminum, zinc, copper and solder.
  • PROTECTION LIFE
    • If properly applied, Axxanol™ 33 will protect metals for up to 6 months under shelter.
  • COVERAGE
    • 3000 sq. ft./gallon (drained)
    500 sq. ft./gallon (30 second drain)
  • SHELF LIFE & HANDLING
    • Shelf life of 2 years if stored in original container, at 85º F or less and out of direct sunlight.
  • DISPOSAL
    • Treat as petroleum waste. Dispose of absorbed material at an approved disposal facility. Always consult federal, state and local regulations.
 
P R O D U C T  I N F O R M A T I O N
Zerust® Axxanol™ 33 is an easy-to-use oil-based corrosion preventive
coating that is widely used as a replacement for standard oil in dipping
applications. Axxanol™ 33 provides powerful corrosion protection
against aggressive environments (salt air, high temperatures, etc.) for
ferrous and some non-ferrous metals including iron, steel, aluminum,
zinc, copper and solder for up to six months under shelter.

Typical Zerust® Axxanol™ 33 applications include corrosion protection
for in-line rolling mill applications, cold rolled sheet and coils, wire bar,
and cast & machined ferrous and non-ferrous metals during shipment
and storage. Use Axxanol™ 33 in conjunction with Zerust® Ferrous Film
for a more robust solution that provides corrosion protection for up to
five years.
APPLICATION EXAMPLES
ZERUST® AXXANOL™ 33 PROTECTING A TORQUE CONVERTER FROM CORROSION DURING SHIPMENT FROM KOREA TO THE USA.








ZERUST® AXXANOL™ 33 PROTECTING A CRANKSHAFT FROM CORROSION DURING SHIPMENT FROM FINLAND TO THE USA (SHOWN IN A DUAL PROTECTION SYSTEM WITH ZERUST® FERROUS FILM). 		_61a,61b.jpg
CORROSION PROTECTION FOR :
 
DIRECTIONS FOR USE:
1. Make sure parts are clean and dry.
2. Wear gloves when handling parts to avoid corrosion causing fingerprints.
3. Apply in a well ventilated area
4. Spray, slush, brush or dip metal parts with Axxanol™ 33. Use NIOSH approved mist or air supplied respirator when material is sprayed.
5. Package parts using Zerust® materials for added corrosion protection.
6. Ship or store parts in protected storage (protects up to eight months under shelter).
REMOVAL:
Zerust® Axxanol™ 33 can be easily removed by using any commercially available alkaline cleaner or solvent. Always check with your customer to see if removal of Axxanol™ 33 is required prior to the use of the protected parts.
ICT®700 SERIES OVERVIEW: LIQUID ADDITIVES & COATINGS:
Product Name Metals Protected Corrosion
Protection
Life Outdoors		 Corrosion
Protection
Life Indoors*		 Formulation
Base		 Surface Finish
Axxanol™ 33 Iron, steel, aluminum,
zinc and solder		 Not recommended 6-8 months* Oil-based Thin oil
Axxanol™ 33CD Iron, steel, and copper Not recommended 4-6 months* Solvent-based Very thin oil, dry to touch
Axxanol™ 34CD Iron, steel, aluminum,
zinc, copper and solder		 Not recommended 6 months* Solvent-based Very thin oil
Axxanol™ 46-BIO Iron, steel, aluminum, zinc and solder 1-3 months 10-12 months* Bio-based Thin oil
Axxatec™ 77C (1:24 dilution) Iron, steel, aluminum,
brass, zinc and copper		 Not recommended 3-4 months* Water-based Thin oil
Z-Maxx Iron and steel 9-12 months 18-24 months* Oil based Thick, grease
 
OTHER AVAILABLE PRODUCTS
 
ICT®500 Series: Packaging Films
Our most widely used series of products. A variety of films offer short or long- term corrosion protection for parts and equipment during storage or shipment.
 
ICT®600 Series: Rust Removers
Highly effective rust removers for light to severe rust removal. All ICT®600 series rust removers are non-toxic, non-hazardous & non-corrosive.
 

Environments
 
  
 
 
 
 

 



©2010 Northern Technologies International Corporation (NTIC). All Rights Reserved. NTIC is the owner of the following trademarks: NTI®, NIC®, ZERUST®, The ZERUST People®, MATCH TECH®, Cor-Tab®, Plastabs®, ICT™, Z-CISSM, COR-SCISM and the Color “Yellow”. EXCOR®, VALENO®, ABRIGO® and UNICO® are registered trademarks of EXCOR GmbH, a Joint Venture Partner of NTIC.