Zerust® Axxanol™ 33CD is an easy-to-use, solvent-based corrosion preventive coating that dries to the touch, eliminating sticky and oily surfaces that can pick up dirt and contaminants. Axxanol™ 33CD provides powerful corrosion protection against aggressive environments (salt air, high temperatures, etc.) for ferrous and some non-ferrous metals including iron, steel, aluminum, zinc and solder for up to six months under shelter.
Use Zerust® Axxanol™ 33CD to protect metal parts and cast & machined metals during shipment, storage and work-in-progress. Zerust® Axxanol™ 33CD is perfect for protecting parts during program changeover periods in the assembly process. And, its thin coating does not interfere with torque or pull-out requirements of parts. Use in conjunction with Zerust® Ferrous Film for a more robust solution that protects for up to five years (allow parts to dry prior to packaging).
APPLICATION EXAMPLES
ZERUST® AXXANOL™ 33CD PROTECTING EXHAUST MANIFOLDS FROM CORROSION DURING OCEAN SHIPMENT FROM CHINA TO THE USA (SHOWN IN A DUAL PROTECTION SYSTEM WITH ZERUST® FERROUS FILM).
WATER PUMP HUBS DIPPED IN ZERUST® AXXANOL™ 33CD FOR CORROSION PROTECTION PRIOR TO OCEAN SHIPMENT FROM CHINA TO GERMANY.
CORROSION PROTECTION FOR :
DIRECTIONS FOR USE:
1.
Make sure parts are clean and dry.
2.
Wear gloves when handling parts to avoid corrosion causing fingerprints.
3.
Apply in a well ventilated area that is away from sources of heat or ignition.
4.
Spray, slush, brush or dip metal parts with Axxanol™ 33CD. Use NIOSH approved mist or air supplied respirator when material is sprayed.
5.
Parts must be dry prior to packaging. Drying time is approximately 5 minutes; use a fan to reduce drying time.
6.
Package parts using Zerust® materials for added corrosion protection.
7.
Ship or store parts in protected storage (protects up to six months under shelter).
REMOVAL:
Zerust® Axxanol™ 33CD can be easily removed by using any commercially available alkaline cleaner. Always check with your customer to see if removal of Axxanol™ 33CD is required prior to the use of the protected parts.
ICT™700 SERIES OVERVIEW: LIQUID ADDITIVES & COATINGS:
Product Name
Metals Protected
Corrosion
Protection
Life
Formulation Base
Surface Finish
AxxanolTM 33
Iron, steel, aluminum,zinc and solder
6 months
Oil-based
Thin, medium oil
AxxanolTM 33CD
Iron, steel, aluminum,zinc and solder
6 months
Solvent-based
Thin, dry to touch
AxxanolTM 8110
Iron, steel, copper,brass and aluminum
6 months
Water-based
Thin, invisible
AxxatecTM 77C
Iron, steel, aluminum,brass, zinc and copper
4 months
Water-based
Thin, cloudy,visible
Z-Maxx
Iron and steel
2 years
Oil-based
Thick,grease
OTHER AVAILABLE PRODUCTS
ICTTM500 Series: Packaging Films
Our most widely used series of products. A variety of films offer short or long-
term corrosion protection for parts and equipment during storage or shipment.
ICTTM600 Series: Rust Removers
Highly effective rust removers for light to severe rust removal. All ICTTM600 series
rust removers are non-toxic, non-hazardous & non-corrosive.
Our Customer Service Representative Team is standing by to answer any questions you have. Contact us today!
