Zerust® Axxatec™ 77C can be diluted in different ratios depending on your corrosion protection needs.
APPLICATION TYPE
ORDERING INFORMATION
AVAILABILITY/PART NUMBER
5 Gallon Pail: 350-M-00004PL
55 Gallon Drum: 350-M-00004DR
PROTECTION TYPE
Protects ferrous and some nonferrous metals including iron, steel, aluminum, brass, copper, and zinc.
PROTECTION LIFE
Axxatec™ 77C will protect properly coated metals for up to 4 months under shelter.
DILUTION RATIOS
Common dilution ratios for Axxatec™ 77C are 1:4, 1:12 and 1:24. Please contact a Zerust® Technical Service Representative to discuss the proper dilution ratio for your application.
SHELF LIFE & HANDLING
Concentrate: Shelf life of 2 years. Diluted Axxatec™ 77C: Shelf life of 1 year; agitate prior to use. Store in original container, at 85º F or less and out of direct sunlight.
DISPOSAL
Dispose of in sanitary sewer. Always consult federal, states and local regulations.
Zerust® Axxatec™ 77C is an easy-to-use, water-dilutable corrosion preventive concentrate that contains our proven ICT™ corrosion inhibiting technology. Axxatec™ 77C protects iron, steel, aluminum, brass, copper and zinc for up to four months under shelter.
Use Zerust® Axxatec™ 77C to protect bare metal surfaces (such as those of golf club shafts) during assembly, large equipment during temporary storage, and in situations where water-based spray-on, in-line production or dipping applications are desired. Axxatec™ 77C can be used in conjunction with Zerust® Ferrous Film for a more robust solution that provides corrosion protection for up to five years (allow parts to dry prior to packaging).
APPLICATION EXAMPLES
ZERUST® AXXATEC™ 77C WAS SPRAYED ON TO PROTECT THIS LARGE PIECE OF FARM EQUIPMENT PRIOR TO STORAGE.
CORROSION PROTECTION FOR :
DIRECTIONS FOR USE:
1.
Make sure parts are clean and dry.
2.
Dilute Axxatec™ 77C with deionized or reverse osmosis water (recommended for optimum performance) in a ratio of 1 part Axxatec™ 77C to 24 parts water. Use vigorous agitation when mixing
3.
Wear gloves when handling parts to avoid corrosion causing fingerprints.
4.
Spray, brush or dip metal parts into diluted Axxatec™ 77C.
5.
Air dry. Drying time is approximately 15 minutes.
6.
Ship or store parts in protected storage (protects up to four months under shelter).
REMOVAL:
Zerust® Axxatec™ 77C can be easily removed by using any commercially available alkaline cleaner or solvent. Always check with your customer to see if removal of Axxatec™ 77C is required prior to the use of the protected parts.
ICT™700 SERIES OVERVIEW: LIQUID ADDITIVES & COATINGS:
Product Name
Metals Protected
Corrosion
Protection
Life
Formulation Base
Surface Finish
AxxanolTM 33
Iron, steel, aluminum,zinc and solder
6 months
Oil-based
Thin, medium oil
AxxanolTM 33CD
Iron, steel, aluminum,zinc and solder
6 months
Solvent-based
Thin, dry to touch
AxxanolTM 8110
Iron, steel, copper,brass and aluminum
6 months
Water-based
Thin, invisible
AxxatecTM
77C
Iron, steel, aluminum,brass, zinc and copper
4 months
Water-based
Thin, cloudy,visible
Z-Maxx
Iron and steel
2 years
Oil-based
Thick,grease
OTHER AVAILABLE PRODUCTS
ICTTM500 Series: Packaging Films
Our most widely used series of products. A variety of films offer short or long-
term corrosion protection for parts and equipment during storage or shipment.
ICTTM600 Series: Rust Removers
Highly effective rust removers for light to severe rust removal. All ICTTM600 series
rust removers are non-toxic, non-hazardous & non-corrosive.
Our Customer Service Representative Team is standing by to answer any questions you have. Contact us today!
